10kV Switchgear: Composition and Functions of Different Switchgear Cabinets
Nov 14, 2026| A 10kV power distribution system plays an essential role in delivering electricity safely and reliably to industrial facilities, commercial buildings, and residential areas. Different types of medium-voltage switchgear cabinets work together to perform power reception, distribution, metering, protection, and electrical isolation.
This article introduces six common types of 10kV switchgear cabinets, explaining their main components and functions, as well as the roles of the electrical components installed inside them.
1. Incoming Feeder Cabinet
The incoming feeder cabinet, also known as an incoming switchgear panel, receives electrical power from an external power source and delivers it to the main busbar.
Main Components:
- Vacuum Circuit Breaker (VCB)
- Current Transformers (CTs)
- Disconnector and Earthing Switch
- Surge Arrester
- Live-Line Indicator
- Protection Relays
Main Functions:
1. Power Reception: Receives 10kV electricity from the utility grid or another power source and supplies it to the main busbar.
2. Short-Circuit and Overcurrent Protection: Works with protective relays to disconnect the circuit when electrical faults occur.
3. Electrical Monitoring: CTs provide current signals for measurement and protection.
4. Electrical Isolation: Disconnectors and earthing switches provide isolation and grounding facilities for maintenance.
Depending on the system design, the incoming cabinet may also incorporate undervoltage, overvoltage, earth-fault, and automatic transfer protection.
2. Metering Cabinet
The metering cabinet is designed to measure electrical energy consumption. It is commonly used in high-voltage supply and high-voltage metering systems to provide accurate electricity consumption data for billing and energy management.
Main Components:
- Current Transformers (CTs)
- Voltage Transformers (VTs)
- High-Voltage Fuses
- Energy Meter (kWh Meter)
- Live-Line Indicator
Main Functions:
1. Energy Measurement: CTs and VTs convert primary current and voltage into standardized secondary signals for energy meters.
2. Electricity Billing: Records active energy consumption and, where required, reactive energy consumption.
3. Parameter Monitoring: Measures voltage, current, power factor, and other electrical parameters depending on the meter configuration.
4. Metering Protection: Sealed metering circuits help prevent unauthorized access and tampering.
3. PT Cabinet (Voltage Transformer Cabinet)
The PT cabinet, also known as a voltage transformer (VT) cabinet, provides voltage signals for measurement, protection, and automatic control in the power distribution system.
Main Components:
- Voltage Transformers (PTs/VTs)
- High-Voltage Fuses
- Disconnector or Isolating Switch
- Surge Arresters, where required
- Secondary Protection Devices
Main Functions:
1. Voltage Measurement: Converts primary high voltage into standardized secondary voltage, commonly 100V or 100/√3V, depending on the configuration.
2. Measurement Signal Supply: Provides voltage signals for meters, protective relays, and monitoring instruments.
3. Protection: Supports overvoltage, undervoltage, and other voltage-related protection functions.
4. Automatic Control: Provides voltage signals for automatic transfer and synchronism-check systems.
Common voltage transformer connection methods include V/V, Y/Y, and YN/yn connections. The selection depends on system configuration and grounding requirements.
4. Outgoing Feeder Cabinet
The outgoing feeder cabinet distributes electrical energy from the main 10kV busbar to downstream equipment, such as distribution transformers, motors, and other electrical loads.
Main Components:
- Vacuum Circuit Breaker (VCB)
- Current Transformers (CTs)
- Earthing Switch
- Protection Relay
- Live-Line Indicator
- Cable Connection Terminals
Main Functions:
1. Power Distribution: Supplies electricity from the busbar to individual outgoing circuits.
2. Overcurrent Protection: Detects abnormal current conditions and trips the circuit breaker when necessary.
3. Short-Circuit Protection: Disconnects faulty circuits to prevent damage to electrical equipment.
4. Circuit Control: Connects or disconnects individual feeders according to operating requirements.
Each outgoing feeder operates independently, allowing faults in one branch to be isolated without necessarily affecting other healthy circuits.
5. Bus Coupler Cabinet
The bus coupler cabinet, also called a bus-section panel or bus-tie panel, connects two sections of a busbar system. It is commonly used in medium-voltage switchgear to improve power supply reliability and operational flexibility.
Main Components:
- Vacuum Circuit Breaker (VCB)
- Current Transformers (CTs), where required
- Disconnector, depending on the design
- Earthing Switch
- Protection and Control Relays
Main Functions:
1. Busbar Connection: Connects two independent busbar sections.
2. Power Transfer: Transfers electrical power between busbar sections when required.
3. Standby Power Supply: Supports power restoration when one incoming power source becomes unavailable.
4. Operational Flexibility: Allows different busbar operating arrangements and facilitates maintenance.
Under normal conditions, the bus coupler may remain open to separate the two busbar sections. If one power source fails, an automatic transfer system may close the bus coupler to restore power, provided the necessary interlocking and protection conditions are satisfied.
6. Isolation Cabinet
The isolation cabinet provides electrical isolation between different sections of a power distribution system or between electrical equipment and the power supply. It is mainly used to facilitate inspection and maintenance.
Main Components:
- Disconnector or Isolating Switch
- Earthing Switch
- Live-Line Indicator
- Mechanical and Electrical Interlocking Devices
Main Functions:
1. Electrical Isolation: Separates equipment or circuits from energized power sources.
2. Maintenance Safety: Provides isolation and grounding facilities before maintenance.
3. Equipment Protection: Interlocking devices help prevent incorrect switching operations.
4. Operational Safety: Helps reduce the risk of accidental energization during maintenance.
A disconnector is not designed to interrupt normal load current or short-circuit current. The circuit breaker must first disconnect the load before the disconnector is operated.
7. Main Electrical Components and Their Functions
The following components are commonly installed in medium-voltage switchgear cabinets:
| Component | Main Function |
| Vacuum Circuit Breaker (VCB) | Interrupts normal switching and fault currents within its rated capability. |
| Fuse | Breaks the circuit when current exceeds its specified operating characteristics. |
| Disconnector | Provides electrical isolation for maintenance. |
| Current Transformer (CT) | Converts large current into standard secondary current, commonly 5A or 1A. |
| Voltage Transformer (VT) | Converts high voltage into standard secondary voltage for measurement and protection. |
| Surge Arrester | Limits transient overvoltages caused by lightning or switching operations. |
| Earthing Switch | Grounds isolated electrical circuits to improve maintenance safety. |
| Live-Line Indicator | Indicates the presence of voltage in an electrical circuit. |
Conclusion
Each 10kV switchgear cabinet performs a specific function in the power distribution system. The incoming cabinet receives electricity, the metering and PT cabinets provide measurement signals, and the outgoing cabinet distributes power to downstream equipment. Meanwhile, the bus coupler improves operational flexibility, while the isolation cabinet supports safe maintenance.
Understanding the composition and functions of these cabinets helps electrical engineers, EPC contractors, and equipment purchasers select suitable medium-voltage switchgear solutions for different projects.

