Industry knowledge
-

2025-6-10Which harmonic control and reactive power compensation solution is better for...
In order to reduce power losses in the grid and improve power supply quality, the power supply bureau requires that the power factor of power-consuming enterprises should be above 0.9. Otherwise, the -

2025-6-10The four issues that should be noted in the scheme of reactive power compensa...
Using a low-voltage capacitor compensation cabinet to provide reactive power compensation for the power system is one of the common solutions we adopt. However, in practical applications, there are st -

2025-6-07what's reactive power compensation?
Everyone is aware that there are many inductive loads in the power grid. Basically, any device with a coil is an inductive load. During operation, corresponding reactive power needs to be supplied to -

2025-6-07Characteristics of Hospital Power Distribution System and Scheme for Improvin...
In fact, hospitals are places with extremely high requirements for power quality. Unexpected power outages and grid disturbances have a significant impact on medical equipment, and this cannot be igno -

2025-6-07why should suppress harmonics
Now when we are formulating the reactive power compensation plans for our customers, we always need to connect certain reactors with a certain reactance rate in series with the capacitor banks. Moreov -

2025-6-07Characteristics of the power distribution system for high-rise buildings and ...
With the development of society, the pace of urban modernization is accelerating rapidly. As a result, there are more and more modern high-rise buildings in cities. The power supply and distribution s -

2025-6-070.4kV low voltage distribution system reactive power compensation device
With the increasing scarcity of global energy resources, energy conservation and reduction of energy consumption have drawn increasing attention from people all over the world. Reactive power compensa -

2025-6-07How to deal with the large amounts of high-order harmonics in the electronics...
In the power distribution system of a certain electronics company, there are 5 sets of rectifier transformers, which mainly supply power to 10 melting medium-frequency electric furnaces. This type of -

2025-5-06The new Reactive Power Compensation technology increased the Power Factor Of ...
The main equipment of a casting company is an electric arc furnace. The electric arc furnace is a typical harmonic source, generating a large amount of harmonics, which prevents the compensation capac -

2025-5-05The application of APF in the hospital's power distribution system
As a hospital that provides uninterrupted power supply 24 hours a day, it has a huge demand for electricity. The safety of the hospital's power supply is not only crucial for the safety of medical -

2025-5-06The 4 differences Between Active Filtering And Passive Filtering
1. Working Principle The passive filter is composed of passive components such as LC, and is designed to have a low impedance at a certain frequency, to分流 the harmonic current of the corresponding fre -

2025-5-06How to suppress harmonics?
Harmonic Problems: At present, most reactive power compensation in low-voltage power distribution systems is achieved by installing parallel-type capacitor compensation cabinets on the load side. Howe

