Industry knowledge
-

2024-12-10Electrical Components
Electrical components are components of electronic components and small machines and instruments. They are usually composed of several parts and can be used in similar products. They include resistors -

2025-6-02What are the advantages of composite switches compared with contactors?
The composite switch is used to replace the contactor. Its advantage is that the inrush current is much smaller than contactor. The inrush current at the closing of an AC contactor is at least about 2 -

2025-6-02Low-voltage dynamic reactive power compensation device
"Dynamic reactive power compensation" refers to a type of reactive power compensation with a very short delay time (the delay time is generally no more than 5 seconds). It is mainly applied -

2025-6-02Advantages of Thyristor-Switched Capacitors (TSC)
1. Working Principle of TSC The Thyristor-Switched Capacitor (TSC) operates by detecting the system's voltage and current via a controller, calculating the reactive power (Q) and power factor (PF) -

2025-6-02How to calculate the reactive power compensation amount for each of the high-...
To determine how to calculate the reactive power compensation amount for each line, first, we need to know the parameters related to the energy-saving effect of reactive power compensation: ① the cros -

2025-6-02Three methods for suppressing harmonics
Absorbing harmonic current at the harmonic source is a method for effectively suppressing harmonics. This is a widely used harmonic suppression method in the current power system, and there are mainly -

2025-5-29load is unbalanced, is it better to use three-phase capacitors or to use sing...
When the load is unbalanced, is it better to use three-phase capacitors for simultaneous switching on/off or to use single-phase capacitors for separate phase switching? Under the condition of load ba -

2025-5-29harmonic suppression can be achieved by using reactors
During the operation of frequency converters and speed regulators, they often suffer from the impact of surge currents and surge voltages, which can severely damage the performance and service life of -

2025-5-29What do group reactive power compensation and split phase reactive power comp...
The low-voltage compensation capacitor cabinet is equipped with common compensation (three-phase) capacitors and separate compensation (single-phase) capacitors. During the capacitor switching process -

2025-5-29How to distinguish between passive filters and active filters in harmonic con...
To distinguish between passive filters and active filters, one must first understand what passive means. A passive filter is a filtering circuit composed of components such as resistors, inductors, an -

2025-5-29Frequency converter harmonic suppression device
The electricity saved by frequency conversion technology can reach over 30%, which is of considerable benefit. With the increasingly widespread popularity and application of frequency converters, thei -

2025-5-29APF solve five major problems in the application of frequency converters.
With the development of industry, previously, ordinary asynchronous motors were mostly designed for constant frequency and constant voltage. They could no longer fully meet the requirements of variabl

