Cold Shrink Tubing Termination Kits

Cold Shrink Tubing Termination Kits

✅ IEC 60502-4:2023 type test reports available (Wuhan High Voltage Testing Institute)
✅ Approved supplier for State Grid & China Southern Power Grid
✅ Premium Liquid Silicone Rubber
✅ Passed full dielectric & partial discharge tests with ample insulation margin.
✅ 10+ years of experience, custom process available for site conditions

  • Product Introduction
Cold shrink cable termination 8.7/15kV 12/20kV 26/35kV liquid silicone rubber termination kit

Cold Shrink Cable
Termination

8.7/15kV · 12/20kV · 26/35kV

IEC Report|State Grid Supplier|10+ Years Engineering
Request a Quote

Watch Our Product Video

Cold Shrink Tubing

HOT SALE
Three core cold shrink cable termination kit for 11kV and 33kV XLPE cable

Premium LSR,
Not Cheap Rubber

Liquid Silicone Rubber (LSR)
Virgin LSR material, injection-molded for uniform density
No Cheap Solid Rubber
No recycled PP, no reclaimed rubber fillers, no low-grade blends
-20°C Cold Flexibility
Pull-tab remains smooth in extreme cold, no cracking or snap-off
100% Elastic Recovery
Consistent shrink-back force over decades of service
Flexible liquid silicone rubber cold shrink tube with high elasticity and tear resistance

Premium Liquid
Silicone Rubber

✓  Superior elasticity & shrink performance
✓  Anti-aging and anti-tear resistant
✓  Strong gripping force on cable
✓  Long-term operating stability
✓  Heavier weight = more material used

Indoor vs Outdoor Cold Shrink Terminations

Indoor type cold shrink cable termination for switchgear and cable pits
INDOOR TYPE
• Compact design, fewer sheds
• For indoor switchgear, cable pits, dry environments
• Standard silicone insulation
• Space-saving installation
Outdoor type cold shrink cable termination with UV, rain and pollution resistant silicone sheds
OUTDOOR TYPE
• Extended larger sheds (longer creepage distance)
• UV, rain, wind and pollution resistant
• For substations, overhead connections, outdoor cabinets
• Enhanced weather protection
Available in 8.7/15kV · 12/20kV · 26/35kV ratings

Thicker Wall. More Safety Margin.

We use more silicone material than industry average.

OUR PRODUCT
Cross section of thick wall silicone cold shrink cable termination with 3.0mm and 6.0mm insulation wall
10KV
3.0 mm
35KV
6.0 mm
✓ Superior insulation margin
COMPETITOR
Cross section of thin wall competitor cold shrink termination with only 2.0mm and 3.5mm wall
10KV
2.0 mm
35KV
3.5 mm
✗ Thinner wall, less safety margin

Up to 60% more silicone material on 35kV rating.

Engineered Stress Cone Design

Stress cone cross section of silicone cold shrink cable termination showing the stress control cone
Silicone Insulation Body
Stress Control Cone

Precision-molded for uniform electric field distribution

Integrated Support Core Design

Cold shrink tube without support core before installation
WITHOUT SUPPORT CORE
Cold shrink tube with integrated support core and pull tab for fast installation
WITH SUPPORT CORE
Pre-expanded, pull-tab design for
fast, easy installation
✓
300kV high voltage test hall for partial discharge, withstand voltage and impulse voltage testing of cold shrink cable terminations

Fully Type-Tested to IEC Standards

300kV Test Hall
Partial Discharge Test
Withstand Voltage Test
Impulse Voltage Test
Higher insulation margin · Safer redundancy · IEC Report available
Cold shrink cable termination factory production line with injection molding machines

Built by Experts.
Backed by Decades.

IEC Test Report
State Grid Qualified
Supplier
Southern Power
Grid Supplier
2-Year Shelf Life
10+ Years Engineering
Experience

Our Certifications

IEC type test reports and quality certificates for cold shrink cable terminations

Frequently Asked Questions

What voltage ratings are available?
We offer 8.7/15kV, 12/20kV, and 26/35kV cold shrink cable terminations, for both indoor and outdoor applications.
How to choose indoor vs outdoor type?
Indoor type is for dry switchgear and cable pits. Outdoor type has extended silicone sheds for UV, rain, and wind resistance.
What is the shelf life?
Our cold shrink terminations have a 2-year shelf life from the date of manufacture when stored in original packaging.
What is the operating temperature range?
Premium LSR material performs smoothly down to -20°C, with no cracking or pull-tab breakage in extreme cold.
Do you provide IEC test reports?
Yes. Full type test reports including partial discharge, withstand voltage, and impulse tests are available on request.
Can you customize for specific projects?
Yes. With 10+ years of engineering experience, we can optimize production processes based on your project site conditions.

Need a datasheet or quotation?

Contact Our Engineering Team →

Hot Tags: cold shrink tubing termination kits, China cold shrink tubing termination kits manufacturers, suppliers, factory, cold shrink cable joint, cold shrink cable jointing kit, cold shrink joint, cold shrink termination kit, Cold Shrinkable Intermediate Joint, fusion connector

← Previous: No Information
Send Inquiry

(0/10)

clearall