American Combined Transformer Box Substation
✅Compact size, small footprint
✅Easy installation,plug-and-play
✅Suitable for ring main system
✅High safety: Fully insulated, fully sealed structure
✅Aesthetically friendly
- Product Introduction
Products Feature
- Ultra-Compact Footprint: Occupies only 1/3 to 1/5 of the space required by European-style substations, with a reduced overall height. Perfect for tight urban spaces.
- Dual-Fuse Protection: High-voltage side features full-range dual-fuse protection, significantly improving safety while reducing operational and maintenance costs.
- Live Cable Connections: Supports emergency plugging and unplugging under a 200A load current. Available in both loop-network and terminal configurations to suit your grid layout.
- Smart Safety & Protection: The LV side includes an electronic phase-failure protector that instantly trips the main breaker upon detecting abnormal voltage. Plus, the enclosure features built-in anti-theft protection.
- Advanced Thermal Management: Built with a cellular double-layer composite panel, providing excellent thermal insulation and heat dissipation for stable operation.
- Optional Split-Tank Design: Available with a separated tank structure to effectively prevent oil contamination in the main transformer tank, extending equipment lifespan.
- Automation Ready: HV side is equipped with oil-immersed or SF6 load switches featuring auto-upgrading capabilities, laying a solid foundation for future distribution automation.
- High-Efficiency Core: Utilizes oil-immersed S9 or premium S11 series transformers, ensuring minimal energy loss, low noise levels, and high overload capacity.

① American combined transformer box substation
② Design Number
③ Rated voltage on high-voltage side (kV)
④ Rated voltage on low-voltage side (kV)
⑤ Transformer Capacity (kVA)
Technical Parameters
| Technical Parameter | Value / Unit | Practical Advantage |
|---|---|---|
| Rated Voltage | 10 kV (HV) / 0.4 kV (LV) | Standard medium-voltage urban distribution. |
| Max. Operating Voltage | 12 kV (HV Side) | Ensures safe margin during grid fluctuations. |
| Rated Frequency | 50 Hz | Stable power output for industrial use. |
| Rated Capacity | 50 - 1600 kVA | Wide range to meet various load demands. |
| Power Freq. Withstand (1min) | 35 kV | High dielectric strength for reliable operation. |
| Lightning Impulse Withstand | 75 kV | Protects equipment from severe voltage surges. |
| Cooling Method | Oil-immersed self-cooling (ONAN) | Zero-maintenance, highly reliable cooling. |
| HV Backup Fuse Breaking Current | 50 kA | Robust protection against severe short circuits. |
| Insertion Fuse Breaking Current | 2.5 kA | Fast-acting protection for localized faults. |
| Ambient Temperature Range | -35°C to +40°C | Built for extreme climates (deserts to tundra). |
| Max. Coil Temp. Rise | 65°C | Prevents overheating and extends lifespan. |
| No-Load Voltage Regulation | ±5% or ±2×2.5% | Guarantees stable output voltage for end-users. |
| Noise Level | ≤ 50 dB | Ultra-quiet operation for residential areas. |
| Protection Class | IP43 | Excellent defense against dust and splashing water. |
Site Preparation & Installation Requirements
- Foundation Leveling: The concrete foundation must be perfectly level. Secure the substation firmly to the foundation using the provided clamping plates.
- Clearance for Operation: Maintain a minimum clearance of 1.5 meters in front of the switchgear to ensure safe and easy access for daily operation and maintenance.
- Cable & Grounding Layout: Cable fixing brackets and grounding busbars must be pre-embedded. Their vertical arrangement can be adjusted on-site to fit your specific project conditions.
- Customizable Cable Entries: The positions for cable entry and exit holes can be customized based on your actual site layout. (Note: Always refer to the actual product dimensions for precise measurements.)
- Grounding System: Construct the grounding grid using either 12 mm galvanized round steel or a 40×4 mm galvanized steel flat bar. Ensure the final grounding resistance strictly complies with your local power utility's specifications.

Civil construction drawings for the incoming and outgoing cables of the substation
FAQ
Q1: What is the difference between American type and European type box substations?
A: The American type (like our ZGS series) integrates the transformer and switchgear into a single oil-tight or gas-tight tank. It's much more compact (1/3 the size of European types) and is ideal for dense urban networks or green spaces. The European type typically has separate compartments for the transformer and switchgear.*
Q2: Can this substation be installed outdoors in coastal areas?
A: Yes. The American Combined Transformer Box Substation is designed with a fully sealed structure (IP43 standard, upgradable to higher ratings). This prevents salt fog, dust, and small animals from entering, making it perfect for seaside resorts, ports, and industrial zones.*
Q3: What kind of transformer is used inside this cabinet?
A: We typically use high-efficiency oil-immersed S9 or S11 series transformers. These transformers offer low energy loss and minimal noise (50 dB), ensuring economical and quiet operation.*
Q4: Do you offer OEM services for this product?
A: Absolutely. As a professional manufacturer in Hubei, China, we welcome OEM orders. We can customize the voltage, capacity, cable entry positions, and even the color (RAL code) to match your specific project requirements.
Hot Tags: american combined transformer box substation, China american combined transformer box substation manufacturers, suppliers, factory, fast acting fuses assembly, three phase pad mounted transformer, compact secondary substation, anti corrosion box type substation, assembled electric equipment, electrical substation box









