Outdoor Heat Shrinkable Termination joint
✅ Superior Moisture and Dust Resistance,Chemical Resistance
✅ Superior Electrical Insulation Flame Retardant
✅ Wider Range of Cable Compatibility (adjustable shrinkage)
✅ Cost-Effective for Bulk Installations
✅ Long Service Life (resists aging & thermal cycling)
- Product Introduction
Jinneng electric Outdoor Heat Shrinkable Termination joint are designed for single and three-core plastic cables from 1 to 36 kV. Outdoor Heat Shrinkable Termination is a type of cable termination used to seal and protect the ends of medium and high-voltage power cables in outdoor environments.
●electrical insulation
●fast installation and widely size range
●mechanical protection
●environmental sealing against moisture, UV radiation, and other harsh weather conditions.
Product Model

|
Specification |
Corresponding square(mm²) for 10kV |
Corresponding square(mm²) for 20kV |
|
NSY1.1 |
25-50 |
50-95 |
|
NSY1.2 |
70-120 |
120-240 |
|
NSY1.3 |
150-240 |
300-400 |
|
NSY1.4 |
300-500 |
500-800 |
|
NSY3.1 |
25-50 |
50-95 |
|
NSY3.2 |
70-120 |
120-240 |
|
NSY3.3 |
150-240 |
300-400 |
|
NSY3.4 |
300-500 |
500-800 |
1. "WSY-10/1.3" means that the outdoor heat shrink terminal of 10kV cross-linked polyethylene insulated power cable is suitable for single-core cables with a cross-section of 150-240mm².
2. "JSY-1/3.2" means the heat shrink joint of 1kV rubber and plastic power cable, which is suitable for the three-core cable with a cross-section of 70-120mm².
Why Specialized for Outdoor Use?
UV-resistant outer layer to prevent degradation,prolong lifespan exceed 10 years.
Wider temperature range (-50°C to +110°C).
Corrosion-resistant materials for longevity.
Contact us if any questions
Key Parameters & Performance
Electrical Performance
| Parameter | Typical Value |
|---|---|
| Rated Voltage | 1 kV to 36 kV (MV), up to 69 kV (HV) |
| Lightning Impulse Withstand | 95 kV (for 11 kV), 250 kV (for 36 kV) |
| Power Frequency Withstand | 22 kV (for 11 kV), 65 kV (for 36 kV) |
| Partial Discharge | <10 pC (ensures insulation integrity) |
Mechanical & Environmental Performance
✔ Shrink Ratio – 3:1 or 4:1 (fits various cable sizes).
✔ Waterproof & Dustproof
✔ Flame Retardant
✔ Resistant to Ozone, Chemicals, and Salt Spray (for coastal/industrial areas).
Common Mistakes & Fixes
| Issue | Root Cause | Solution |
|---|---|---|
| Wrinkled tubing | Uneven heating | Use circular heat pattern at 30cm distance |
| Mastic leakage | Overheating (>180°C) | Control torch temperature with IR sensor |
| Partial discharge | Air voids in insulation | Apply vacuum during shrinking (specialty kits available) |
Applications
● Public Grid & Substations:cable terminations for incoming and outgoing lines in ring main units and compact substations
● Renewable Energy Power Plants:wind farms and solar power plant
● Industry & Manufacturing:petrochemical plants, oil refineries, steel mills, and wastewater treatment plants.
● Transportation Infrastructure:railway station,air port,highways
● Urban Public Facilities:Street Lighting Systems,Urban Rail Transit
● Construction & Temporary Power Supply

Hot Tags: Outdoor Heat Shrinkable Termination joint, China Outdoor Heat Shrinkable Termination joint manufacturers, suppliers, factory, cable analyzing equipment, composite cable accessories, ethernet cable accessories, cable terminating accessories, cable drumming equipment, Boxed Insulated Sheathed Heat Shrink Tubing








